We provide high-quality solutions for renewable energy projects worldwide

Projects

While growing our global presence, we constantly improve our ability to support clients locally.

Enertis Mw

Featured Projects

Our experience includes some of the most relevant renewable energy projects worldwide including:

  • El Romero Solar PV Plant

    El Romero Solar PV Plant

    Country: Chile

    Capacity: 247 MWp

    Service(s): Quality Control and Quality Assurance; Testing & Optimization

    Client(s): Acciona Energía Chile

    Enertis Applus+ carried out quality inspections during the PV module manufacturing process, auditing the manufacturing lines; supervising the process, and verifying the traceability of the materials; carrying out tests in its independent laboratory and electroluminescence and visual inspections upon the delivery of the modules for batch validation. Enertis also supervised the assembly process and completed the work by performing thermography, visual inspections, and night-time electroluminescence tests on the installed PV modules. During the operation phase, Enertis Applus+ carried out module degradation measurements and solar pyranometers calibrations.

  • Portfolio of 21 PV projects for Natixis CIB and Santander CIB

    Portfolio of 21 PV projects for Natixis CIB and Santander CIB

    Country: Spain

    Capacity: 1231 MWp

    Service(s): Technical Advisory

    Client(s): Natixis CIB & Santander CIB

    Enertis Applus+ acted as Technical Advisor for Natixis CIB and Santander CIB in financing a portfolio of 21 solar PV plants in Spain with a total capacity of 1,231 MWp.

  • Creek Portfolio

    Creek Portfolio

    Country: US

    Capacity: Over 280MW PV, with approx 400 MWh of Energy Storage, in total

    Service(s): Owner's Engineering

    Client(s): Carolina Solar Energy

    This portfolio is composed of five PV Projects, featuring 50-60 MW PV per site and an average of 100MWh of long-duration Energy Storage (ESS) at 4 of the total sites. Enertis Applus+ has worked as Owner’s Engineer, while Carolina Solar Energy and the project entities successfully developed and advanced this portfolio. Interconnection Applications (IA) were completed and approved by the affected utilities for PV + ESS operation at all 5 locations. Enertis Applus+ worked closely with Carolina Solar Energy Commercial and Engineering professionals to establish the Basis of Design documents, engineering, PV+ ESS energy modeling, and provide other support and advice to the projects.

  • Slate Project

    Slate Project

    Country: California, US

    Capacity: 300 MWac solar + 140.25 MW / 561 MWh storage

    Service(s): Technical Advisory

    Client(s): Confidential

    Enertis Applus+ acted as Independent Engineer in the Slate project, located in Kings County, California. It is expected to be one of the largest projects in the U.S. In January of 2021, Recurrent Energy completed the sale of the Slate Project to Goldman Sachs Renewable Power LLC.

  • Castillo I, II and Rios projects

    Country: Spain

    Capacity: 97.6 MW (wind) and 92.3 MWp (PV)

    Service(s): Engineering

    Client(s): LCG Renewable Energies Spain, S.L.

    Enertis Applus+ has developed a technical-economic feasibility study of the hybridisation of solar PV and wind power technology for some projects in Spain.

  • Serra do Mel PV Plant

    Country: Brazil

    Capacity: 580 MW (Serra do Mel I & II 320 MW+ Serra do Mel III-VI 260 MW)

    Service(s): Quality Control and Quality Assurance

    Client(s): Voltalia

    Enertis Applus+ assisted Voltalia providing its specialised and independent advice during the pre-manufacturing, manufacturing, and pre-shipment phases. As part of the services that were performed, the company carried out vendor surveillance, namely factory inspections, in China to oversee and evaluate the raw materials for solar PV modules. Also, Enertis Applus+ assessed the compliance of the manufacturing process with the established quality standards and its experienced quality inspectors supervised the entire manufacturing process in China. The services also included pre-shipment factory acceptance tests (FAT). Enertis Applus+ also performed additional and specific tests on the modules in its accredited external laboratory (ISO/IEC 17025, ISO/IEC 17020 and CBTL/IECEE), including the determination of the maximum power under standard conditions, visual, EL, Light Induced Degradation (LID), Potential Induced Degradation (PID) and the Light and Elevated Temperature Induced Degradation Index (LeTID) tests. These tasks are necessary to evaluate the quality and optimal performance of the modules. Similarly, specific tests were carried out on inverters and solar trackers to verify their compliance with predefined technical requirements.

  • Elizabeth and High Horizons PV projects

    Country: US

    Capacity: 240 MWp

    Service(s): Quality Control and Quality Assurance

    Client(s): Opdenergy

    Enertis Applus+ has certified the quality and audited the module supply chain for the High Horizons PV plant in West Virginia and the Elizabeth PV project in Louisiana, collectively totaling 260 MWp in capacity.

  • Puerto Libertad PV Plant

    Country: Mexico

    Capacity: 404 MWp

    Service(s): Quality Control and Quality Assurance; Testing & Optimization

    Client(s): Acciona Energía

    Enertis Applus+ provided its modules’ quality control services across different stages of the Puerto Libertad PV project. The firm performed quality control inspections during the manufacturing of more than 1.200.000 PV modules and during the commissioning phase of the PV plant.

  • Valle 1 project

    Country: Spain

    Capacity: 48,3 MW (wind), 143 MWp (PV) y 37,3 MWh (BESS)

    Service(s): Engineering

    Client(s): LCG Renewable Energies Spain, S.L.

    Enertis Applus+ has developed a technical-economic feasibility study of the hybridisation of solar PV technology, wind and a battery energy storage system (BESS) for a project in Spain.

  • Energy Center

    Country: US

    Capacity: 2000 kVA to 120MVA per project (with storage)

    Service(s): Owner's Engineering

    Client(s): ESS Inc

    Enertis Applus+ works closely with the Commercial and Engineering teams at ESS, Inc., helping to establish system solutions and project designs, providing advanced ESS energy modeling, and helping ESSI establish relations with qualified contractors for delivery of the revolutionary flow technology. Project capacities are 2000 kVA to 120MVA per project – with 10-hours of energy storage duration each.  ESSI’s proprietary, water-based iron process delivered in self-contained containerized units or large, custom sites at customer locations. The designs and documents created during the course of the team's work help in communicating technical details and requirements to potential customers who may be interested in utilizing the new and revolutionary technology offered by ESS, Inc and are establishing standards and best practices for delivery and construction of this critical, long-duration ESS resource.

  • Portfolio of Elawan Energy's PV projects

    Country: Spain

    Capacity: 50 MWp each plant, with a total capacity of 250 MWp

    Service(s): Technical Advisory

    Client(s): Elawan Energy

    Enertis Applus+ acted as Lender’s Technical Advisor (LTA) to Banco Sabadell, Bankia, Abanca, and Banco Pichincha Spain in the financing of five Elawan Energy solar PV plants located in Spain, in Castilla-La Mancha region. The total amount of the structured loan for the five projects is approximately 92 million euros. Enertis Applus+ carried out the technical Due Diligence for the five plants, reviewing the projects in accordance with the Equator Principles and the loan in accordance with the Green Loan Principles (GLP). Enertis Applus+ will continue to advise the financial institutions in the construction, commissioning, and operation phases.

  • Portfolio of PV projects in Chile and Colombia

    Country: Colombia and Chile

    Capacity: 260 MWp

    Service(s): Owner's Engineering

    Client(s): Matrix Renewables

    Enertis Applus+ provided owner’s engineering services for a portfolio of solar photovoltaic projects located in Chile and Colombia. Specifically, Enertis Applus+ acted as technical advisor to Matrix Renewables in the acquisition and construction of 24 solar photovoltaic projects developed under the Small Distributed Generation (PMGD) program. The projects, located in Chile, have a total capacity of 178 MWp. Enertis Applus+ has performed construction and operation and maintenance contract reviews, detailed engineering review, construction supervision, and provisional acceptance verification. Moreover, Enertis Applus+ worked as owner's engineer in three Matrix Renewables’ solar photovoltaic projects located in Colombia, with a total capacity of 82 MWp, providing the same services as the ones mentioned above.

  • BESS Tech. Spec. project

    Country: Spain

    Capacity: 17MWpv 2.5MW/5MWh

    Service(s): Engineering

    Client(s): Grupo SAMCA

    Enertis Applus+, according to the needs required by the client, prepared the technical specifications of the BESS system, managed the RFP of suppliers and carried out the analysis and evaluation of the technical-commercial proposals received.

  • Sol del Desierto Project

    Country: Chile

    Capacity: 244 MWp

    Service(s): Technical Advisory

    Client(s): Atlas Renewable Energy

    Enertis Applus+ carried out a technical due diligence for the financing of the Sol del Desierto PV plant. Moreover, the firm also carried out in situ albedo measurements to validate the inputs of the production study. During the construction phase, Enertis Applus+ is supervising the works on behalf of the financial institutions and it will follow up during the operation phase.

  • Tastiota PV Plant

    Country: Mexico

    Capacity: 126 MWp

    Service(s): Technical Advisory

    Client(s): Canadian Solar / SMBC

    Enertis Applus+ acted as Technical Advisor for Canadian Solar Inc and Sumitomo Mitsui Banking Corporation (SMBC) in the US$93 million non-recourse financing of the 126 MWp Tastiota solar PV project. The plant, located in the state of Sonora, Mexico, is one of the first utility-scale projects in Mexico under project finance to use bifacial PV modules.

  • Amin PV Plant

    Country: Oman

    Capacity: 105 MW

    Service(s): Quality assurance and quality control; Owner's engineering

    Client(s): Marubeni

    Enertis Applus+ acted as Owner's Engineer for the 105 MW Amin solar photovoltaic (PV) plant located in the Sultanate of Oman. The project is so far one of the biggest solar parks in the Middle East to use bifacial photovoltaic modules, which can withstand desert temperature fluctuations, and, with the signing of a 23-year power purchase agreement (PPA), it is one of the world’s first utility-scale PV project to have an oil and gas company, Petroleum Development Oman LLC (PDO), as the sole wholesale buyer of energy. Enertis Applus+ has also carried out Final Acceptance Test (FAT) related services during the production of bifacial PV modules in China, as a first-class factory inspection and testing company in Asia, leading and monitoring every technical-related aspect, with a special focus on the approval of the detail design for the project. Also, Enertis Applus+ has deployed an experienced on-site team to supervise the construction activities, ensure compliance with the contractual obligations and verify the quality of the works.

  • Cauchari Solar I, II, III project

    Country: Argentina

    Capacity: 315,83 MWp

    Service(s): Owner's Engineering

    Client(s): Jemse

    Enertis Applus+ acted as Owner's Engineer for this peculiar project located at 4000 mt in the Jujuy province, in Argentina.

  • Portfolio of PV projects in Ukraine

    Country: Ukraine

    Capacity: 230 MW

    Service(s): Technical Advisory

    Client(s): Confidential

    Enertis Applus+ carried out a technical due diligence for the potential acquisition of a portfolio of PV projects in Ukraine. So far, this operation represents one of the biggest financial transactions in the country.

  • Portfolio of PV projects in Australia

    Country: Australia

    Capacity: 75 MWp

    Service(s): Quality Control and Quality Assurance; Testing & Optimization

    Client(s): Confidential

    Enertis Applus+ carried out quality control inspections for a portfolio of PV projects located in Queensland and New South Wales.

  • Portfolio of PV projects in the UK

    Country: UK

    Capacity: 365 MW

    Service(s): Technical Advisory

    Client(s): Santander, RBS and 9 other banks

    Enertis Applus+ acted as independent technical advisor to a pool of 11 banks for the refinancing of a portfolio of 24 PV plants located in the UK.

  • Celsia Solar Bolívar PV project

    Country: Colombia

    Capacity: 8,06 MWac

    Service(s): Owner's Engineering

    Client(s): Celsia

    Enertis Applus+ acted as Owner's Engineer for one of the first utility-scale PV plants in Colombia, the Celsia Solar Bolívar PV project. As part of its services, Enertis Applus+ reviewed the detailed engineering of the plant and assigned an in-situ team to supervise the construction and commissioning of the project.

  • Portfolio of PV projects in Spain

    Country: Spain

    Capacity: 112 MW

    Service(s): Owner's Engineering

    Client(s): RWE Renewables

    Enertis Applus+ has been appointed as Owner’s Engineer for three solar photovoltaic plants property of RWE Renewables. These solar PV plants, located in Spain, have a total capacity of 112 MW. The Owner’s Engineering services are provided during the design, planning, construction, and commissioning phases, in order to ensure the projects’ quality throughout their lifetime.

  • Arinos PV project

    Country: Brazil

    Capacity: 412.62 MWdc

    Service(s): Testing & Optimization

    Client(s): Cet Brazil Transmissão de Energia Ltda

    Enertis Applus+ has provided its Testing & Optimization services to Cet Brazil Transmissão de Energia Ltda in performing post-shipment EL tests on 20.000+ PV modules to verify that their integrity and quality have not been compromised during sea and road transportation from the factory to the plant, located in Arinos, in the state of Minas Gerais.