Insights

Degradation Control Tests for Solar PV Modules

The main component in utility-scale solar photovoltaic (PV) projects are the PV modules themselves. Typically, depending on the size and topology of the project, they can represent 30% to 40% of the initial investment.

To ensure a high return on investment (ROI), the implementation of suitable degradation control tests for modules is crucial to detect potential underperformance incidences on time, as well as to ensure the terms of warranty granted by the module supplier are being fulfilled throughout the entire lifecycle of the project, which is generally some 25-30 years.

Such degradation control tests are usually realized by measuring the Maximum Power of a representative sample of modules in standard test conditions (STC). Those measurements in STC are typically carried out in fixed laboratories, where irradiance, spectrum and temperature conditions are under control.

That means transporting modules from the plant to a suitable laboratory, which raises several issues, including: Risk of damage, due to the transportation/handling of the modules; production losses due to prolonged periods of disconnection; and customs issues surrounding the import/export of the modules, among others.

Against this background, the trend in the market to carry out such degradation control tests has been towards the implementation of Mobile Laboratories, such as the ones developed in-house by Enertis, as pioneer in the global PV industry, which have been operating successfully for several years.

Figure 1. PV Mobile Laboratory developed in-house by Enertis at the beginning of 2013.

However, given the development of big PV projects in regions, such as Northern Africa (Morocco, Tunisia, Egypt), and the Middle East (Saudi Arabia, UAE, Jordan), where it is unusual to find fixed photovoltaic laboratories, and economically unviable to send mobile laboratories, we asked how degradation control tests could be carried out for these modules, in a precise, quick and economic manner.

The solution? Determine the Maximum Power of modules in STC through the correlation with reference modules.

Procedure to determinate maximum power of modules at standard test conditions in the field through correlation with measurements carried out in laboratory

For the measurement of modules in natural sunlight with a limited degree of uncertainty, Enertis has implemented a procedure, based on a methodology originally developed by the Institute of Solar Energy IES of the Universidad Politécnica de Madrid in Spain.

For the procedure, the calibration of a Reference Module (RM) is required, which, preferably, is manufactured with the same Bill of Material (BOM) as the modules to be measured – the Devices Under Test (DUT).

The RM should be carefully calibrated in an accredited laboratory with an expanded uncertainty measurement (k=2), preferably below 2%. Both the RM, as well as the DUT, must be measured on site quasi-simultaneously and in the same irradiance, spectrum and temperature conditions.

Given that the RM has the same spectral and thermal response as the DUT, a correlation between the corresponding measurements can be realized to determine the Laboratory Equal Maximum Power (LEMP) of the DUT.

Figure 2. Reference Module installation (left) and portal measure equipment (right).

This procedure does not require the removal of any modules, can be carried out easily, and makes use of portable measuring equipment. Indeed, it has been successfully implemented by Enertis in utility-scale facilities located, for example, in Jordan, Chile, Italy and Spain.

And its simplicity has enabled measurement speeds of up to 100 modules per hour to be reached, with expanded measurement uncertainty levels always below ±3.5%.

Finally, we believe that the commitment to the technological innovation and development of the photovoltaics industry is, in short, a real commitment and a necessary leverage to assure the development and consolidation of the industry globally. Thus, we are convinced that in the next years will be developed methodologies and equipment that allow to realize precise control tests of the photovoltaic modules.

 

Further technical details about the procedure can be found in the following scientific article:

  1. Pérez, J.A. Florez, M. Martínez, E. Alvarez, F. Domínguez, G. Castillo, A. Inza, H. Silva, R. Gómez, M. Fernández, V. Parra and A. Velasco. “Implementation of an accurate measurement procedure to determinate maximum power of modules at standard test conditions in the field through correlation with measurements carried out in laboratory”. 33rd European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam 2017 pp. 1945-1949.